Black Box KV21008A, KV21008E, KV22008E, KV22016E - page 17

CHAPTER 3: INSTALLATION
15
Figure 3-2. Basic ServSelect III Switch Configuration
To connect a server using a SAM:
1. Locate the SAMs for your ServSelect III switch.
2. Attach the appropriately color-coded cable ends to the keyboard, monitor and mouse ports
on the first server you will be connecting to the appliance.
3. Attach one end of a CAT 5 cable to the RJ45 connector on the SAM.
4. Connect the other end of the CAT 5 cable to the desired port on the back of your
ServSelect III switch.
5. Repeat steps 2 through 4 for each server you wish to attach.
Analog User B
Configuration Port
(for updating firmware) ServSelect III Switch
(KV22016A Shown)
Servers 3-16
SAM
Analog User A
Server 2
ServSelect III cable
Server 1