CHAPTER 4: BASIC OPERATIONS
34
To immediately turn on the screen saver:
Press Print Screen, then press Pause.
4.5 Displaying Version Information
The OSD interface enables you to display the versions of the ServSelect III switch, as
well as the SAM and ServSelect III cable firmware. For optimum performance, keep
your firmware current. For more information, see Appendix A.
To display version information:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - Display Versions. The Version dialog box displays. The top half of
the box lists the subsystem versions in the appliance.
Figure 4-11. Version Dialog Box
3. Click the Targ et button to view individual SAM and ServSelect III cable version
information. The Target Selection dialog box displays.
Figure 4-12. Target Selection Dialog Box
4. Select an SAM or ServSelect III cable to view and click the Version button. The
Target Version dialog box displays. For more information on loading firmware, see
Appendix A.