CHAPTER 4: BASIC OPERATIONS
35
Figure 4-13. Target Version Dialog Box
5. Click X to close the Target Version dialog box.
NOTE:
Load Firmware button will only display for a SAM; ServSelect III cables are not upgradable.
Only the
administrator and the user (when local user accounts are disabled) can upgrade the firmware on a SAM.
4.6 Scanning Your System
In scan mode, the appliance automatically scans from port to port (server to server). You
can scan up to 16 servers, specifying which servers to scan and the number of seconds that
each server will display. The scanning order is determined by placement of the server in
the list. The list is always shown in scanning order. You can, however, choose to display
the server’s name or EID number by pressing the appropriate button.
To add servers to the scan list:
1. If the OSD interface is not open, press Print Screen. The Main dialog box will
appear.
2. Click Setup - Scan. The Scan dialog box displays.
Figure 4-14. Scan Dialog Box
3. The dialog box contains a listing of all servers attached to your ap plia nc e. Click the
checkbox next to the servers you wish to scan.