CHAPTER 4: BASIC OPERATIONS
33
To remove password protection from your console:
1. From the Main dialog box, click Setup - Security; the Password dialog box di sp lays.
Type your password, then click OK.
2. In the Security dialog box, single-click and press Enter or double-click in the New
box. Leave the box blank. Press Enter.
3. Single-click and press Enter or double-click in the Repeat box. Leave the box blank.
Press Enter.
4. Click OK to eliminate your password.
To enable local user accounts:1. Click the Enable Local User Accounts checkbox.2. Click OK.To disable local user accounts (admin user only):1. Click Enable Local User Accounts to uncheck the box and disable this option.2. Click OK.To enable the screen saver mode with no password protection:
1. If your console does not require a password to gain access to th e Security dialog box,
proceed to step 2.
-or-
If your console is password protected, see the previous procedure, then go to step 2.
2. Select Enable Screen Saver.
3. Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of
the
screen saver.
4. Choose Energy if your monitor is ENERGY STAR compliant; otherwise select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR.
5. (Optional) Click Test to activate the screen saver test which lasts 10 seconds then
returns you to the Security dialog box.
6. Click OK.
NOTE:
Activation of the screen saver mode disconnects the user from a server; no server is selected. The status
flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dial og box disp lays and an y pre viou s s erve r
connection will be restored.
To turn off the screen saver:
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.