CHAPTER 4: BASIC OPERATIONS
31
4. In Display Mode, select Opaque for a solid color flag or select Tran sparen t to see the
desktop through the flag.
5. To position the status flag on the desktop:
a. Click Set Position to gain access to the Set Position Flag screen.
b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
Figure 4-9. Set Position Flag
NOTE:
Changes made to the flag position are not saved until you click OK in the Flag dialog box.
6. Click OK to save settings.
-or-
Click X to exit without saving changes.
Setting console security
The OSD interface enables you to set security on your analog port console. You can
establish a screen saver mode that engages after your console remains unused for a
specified Inactivity Time. Once engaged, your consol e wil l remain locked until you press
any key or move the mouse. You will then need to type in your password to co ntinue.
Use the Security dialog box to lock your console with pass wor d protection, set or change
your password and enable the screen sav er.
NOTE:
If a password has been previously set, you will have to enter the password before you can access the
Security dialog box. If you should lose or forget your password, please contact BLACK BOX Technical
Support about returning your switch for service.
To access the Security dialog box:
1. Press Print Screen to launch the OSD interface. The Main dialog box will appear.
2. Click Setup - Security. The Security dialog box displays.