Black Box KV5300 Series manual Appendix a Nvram Factory Defaults

APPENDIX A: NVRAM Factory Defaults

Appendix A: NVRAM Factory Defaults

The table below and on the next page shows, for the ServSwitch’s saveable options, the default values stored in nonvolatile memory (NVRAM) when the ServSwitch is shipped from the factory. It also shows what commands or actions can change these settings for the ServSwitch’s current operating period, as well as what commands or actions can save changed settings to NVRAM, so that they become the new defaults.

Option	Factory-Default Setting	To Change	To Save
			Changes
Caps/Scroll/	Num Lock ON (fixed)	Select port, then press the	Can’t be
Num Lock		corresponding button on the	saved
		keyboard
Scan	OFF	Type [CTRL] S (to turn ON) or	Can’t be
		[CTRL] X (to turn OFF)	saved
Scan-Delay	5 seconds	Type [CTRL] Txx [ENTER]	[CTRL] K
Time		(xx = any 1- or 2-digit number,
		time in seconds)
IBM, multi	PS/2	Type [CTRL] Mxx [ENTER]	[CTRL] K
models only:		(xx = 20 or 21 for the keyboard,
Shared		30 to 32 for the mouse)
Keyboard and
Mouse Types
IBM, multi	Mode 2, PS/2	Select port, then type [CTRL]	[CTRL] K
models only:		Mxx [ENTER] (xx = 1 to 7, 9, or
CPU Key-		10)
board Mode
and Mouse
Interface
Maximum	2-port models: 4;	Type [CTRL] Pxxx [ENTER]	[CTRL] K
Ports	Other models: Number of	(xxx = any 1- to 3-digit number up
	CPU ports on unit	to 256)
IBM, multi	Mini models: 4;	Type [CTRL] Wxxx [ENTER]	[CTRL] K
models only:	Other models: 16	(xxx = 2 to 255)
Width of
Submasters
IBM, multi	0 (no submasters)	Type [CTRL] Uxxx [ENTER]	[CTRL] K
models only:		(xxx = 0 to 255)
Units

93