Chapter 3: Installation and Initial Setup
Figure 3-27. Modbus Priority screen.
c. These settings allow the gateway to move high priority messages to the front of the serial message buffer. The priority can be based on the originating IP address, the Modbus ID, the Modbus function code, or any combination of the three. Up to five different priorities can be set.
d. “IP Address”—Used to set a static Internet protocol address for the Modbus Hardened Serial Server.
e. “Modbus ID”—Valid range is from 1 to 247.
f. “Function Code”—Valid range is from 1 to 99.
g. Save settings by clicking the “Save” button.
Configuring with the Web Interface
LES431A Modbus Hardened Serial Servers can be configured over the network using a standard Internet browser such as Internet Explorer® or Firefox®.
To open the Web configuration interface:
1. On a PC connected to the network, open a Web browser.
Page 31 |
