Chapter 3: Configuration
•Rate Limiter ID: Select which rate limiter to apply on this port. The permitted values are “Disabled“ or the values 1 through 16. The default value is “Disabled“.
•Port Copy: Select which port frames are copied on. The values permitted are “Disabled“ or a specific port number. The default value is “Disabled.“
•Mirror: Specify the mirror operation of this port. The permitted values are:
- Enabled: Frames received on the port are mirrored.
- Disabled: Frames received on the port are not mirrored. The default value is “Disabled“.
•Logging: Specify the logging operation of this port. The permitted values are:
- Enabled: Frames received on the port are stored in the System Log.
- Disabled: Frames received on the port are not logged.
The default value is “Disabled“. Please note that the System Log memory size and logging rate are limited.
•Shutdown: Specify the port shutdown operation of this port. The permitted values are:
- Enabled: If a frame is received on the port, the port will be disabled.
- Disabled: Port shutdown is disabled. The default value is “Disabled“.
•Counter: Counts the number of frames that match this ACE.
•Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
•Icons, upper right of screen (Refresh, clear): Click to refresh the ACL Ports Configuration or to clear them manually.
LPB2810A | Page 51 | |
|
|