Chapter 5: Maintenance
5.5 Diagnostics
This section provides a set of basic system diagnotsics. It lets users know that whether the system is healthy or needs to be fixed. The basic system check includes ICMP Ping, ICMPv6, and VeriPHY Cable Diagnostics.
5.5.1 Ping
This section allows you to issue ICMP PING packets to troubleshoot IPv6 connectivity issues.
Web Interface
To configure an ICMP PING Configuration in the Web interface:
1.Specify ICMP PING IP Address.
2.Specify ICMP PING Size.
3.Click “Start.“
Figure 5-10. The ICMP Ping screen.
Parameter Description
•IP Address: To set the IP address of the device to ping.
•Ping Size: To set the ICMP packet size to ping the other device.
•Start: Click the “Start” button. The switch will start to ping the device using ICMP packet size set on the switch.
After you click “Start,” 5 ICMP packets are transmitted, and the sequence number and roundtrip time are displayed upon reception of a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs.
PING server ::10.10.132.20
64 bytes from ::10.10.132.20: icmp_seq=0, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=1, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=2, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=3, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=4, time=0ms Sent 5 packets, received 5 OK, 0 bad
Page 214 | LPB2810A | |
|
|
