Configuration | Black Box LPB2810A, LPB2826A, LPB2848A specification

Models: LPB2848A LPB2826A LPB2810A PoE+ Gigabit Managed Switch Eco

Chapter 3: Configuration

Parameter Description: Coordinates Location

•Latitude: Latitude should be normalized to within 0-90 degrees with a maximum of 4 digits. It is possible to specify the direction to either north of the equator or south of the equator.

•Longitude: Longitude should be normalized to within 0-180 degrees with a maximum of 4 digits. It is possible to specify the direction to either east of the prime meridian or west of the prime meridian.

•Altitude: Altitude should be normalized to within -32767 to 32767 with a maximum of 4 digits. It is possible to select between two altitude types (meters or floors).

-Meters: Representing meters of altitude defined by the vertical data specified.

-Floors: Representing altitude in a form more relevant in buildings that have different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a building, and represents ground level at the given latitude and longitude. Inside a building, 0.0 represents the floor level associated with ground level at the main entrance.

•Map Datum: The Map Datum is used for the coordinates given in these options:

-WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich.

-NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich. The associated vertical datum is the North American Vertical Datum of 1988 (NAVD88). This datum pair is to be used when referencing locations on land, not near tidal water (which would use Datum = NAD83/MLLW).

-NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich. The associated vertical datum is Mean Lower Low Water (MLLW). This datum pair is to be used when referencing locations on water/sea/ocean.

Parameter Description:

•Civic Address Location: IETF Geopriv Civic Address based Location Configuration Information (Civic Address LCI).

•Country code: The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.

•State: National subdivisions (state, canton, region, province, prefecture).

•County: County, parish, gun (Japan), district.

•City: City, township, shi (Japan) - Example: Copenhagen.

•City district: City division, borough, city district, ward, chou (Japan).

•Block (Neighborhood): Neighborhood, block.

•Street: Example: Poppelvej.

•Leading street direction: Leading street direction - Example: N.

•Trailing street suffix: Example: SW.

•Street suffix: Example: Ave, Platz.

•House no.: Example: 21.

•House no. suffix: House number suffix - Example: A, 1/2.

•Landmark: Landmark or vanity address - Example: Columbia University.

•Additional location info: Example: South Wing.

•Name: (Residence and office occupant) - Example: Flemming Jahn.

•Zip code: Postal/zip code - Example: 2791.

•Building: Building (structure) - Example: Low Library.

LPB2810A	724-746-5500 blackbox.com	Page 97
LPB2810A

LPB2848A, LPB2826A, LPB2810A, PoE+ Gigabit Managed Switch Eco specifications

The Black Box PoE+ Gigabit Managed Switch series, including the models LPB2810A, LPB2826A, and LPB2848A, presents a robust solution for businesses looking to enhance their network efficiency and reliability. Designed to support the growing demand for Power over Ethernet (PoE) devices, these switches provide the perfect backbone for modern network infrastructures.

One of the most significant features of this series is its PoE+ capability, which allows it to deliver power and data over a single Ethernet cable. This functionality simplifies cabling and installation, making it easier to deploy PoE devices such as IP cameras, VoIP phones, and wireless access points. The LPB2810A offers 8 PoE+ ports, the LPB2826A ups the ante with 24 ports, and the LPB2848A provides a whopping 48 ports, each capable of delivering up to 30 watts of power per port.

The managed switch system ensures that users can customize and optimize their network performance. With advanced features such as VLAN support, Quality of Service (QoS), and link aggregation, organizations can effectively manage traffic, prioritize critical applications, and potentially enhance overall network security. Furthermore, these switches support Layer 2 and Layer 3 functionalities, which allows for greater flexibility when implementing routing policies.

Another critical aspect of the LPB series is its built-in security features. The switches come equipped with advanced security protocols, including IEEE 802.1X port-based access control, which enables network administrators to authenticate devices before granting access to the network. This significantly reduces the risk of unauthorized access and ensures data integrity across the connected devices.

The Black Box PoE+ Gigabit Managed Switches are designed with reliability and ease of use in mind. Their fanless design promotes silent operation, making them ideal for deployment in both office environments and data centers. Additionally, the switches offer a user-friendly web-based interface and CLI options for straightforward management and configuration, catering to both novice and seasoned network administrators.

In conclusion, the Black Box PoE+ Gigabit Managed Switch series, featuring models LPB2810A, LPB2826A, and LPB2848A, stands out with its power-efficient design, extensive port options, and advanced security measures. These switches are an excellent choice for organizations that require a dependable and scalable networking solution to support their growing Ethernet and PoE device needs.