Black Box LPB2848A, LPB2826A, LPB2810A, PoE+ Gigabit Managed Switch Eco System Configuration

Chapter 2: System Configuration

2.1.3 CPU Load

This page displays the CPU load, using an SVG graph. The load is measured as averaged over the last 100-ms, 1-second, and

10-second intervals. The last 120 samples are graphed, and the last numbers are displayed as text as well. To display the SVG graph, your browser must support the SVG format. Consult the SVG Wiki for more information on browser support. Specifically, at the time of writing, Microsoft Internet Explorer will need to have a plug-in installed to support SVG.

Web Interface

To configure System Information in the Web interface:

1.Click System, System Information, CPU Load.

2.Display the CPU Load on the screen.

3.Click Auto-refresh.

Figure 2-3: CPU Load screen.

Parameter Description

• To set the switch to auto-refresh the log, check “Auto-refresh.”

NOTE: The screen under “from” and “to” will display what you set on the “From” and “To” field information.

Page 18 724-746-5500 blackbox.com LPB2810A