Chapter 3: Configuration
Parameter Description
•DSCP: Maximum number of supported DSCP values are 64, and valid DSCP value ranges from 0 to 63.
•Ingress: The Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS class and DPL map. There are two configuration parameters for DSCP translation:
1.Translate : DSCP at Ingress side can be translated to any of
2.Classify : Click to enable Classification at Ingress side.
•Egress: The following configurable parameters are for the Egress side:
1.Remap DP0 : Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63
2.Remap DP1 : Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63.
Following this, there is a configurable parameter for the Egress side.
Remap: Select the DSCP value from select menu to which you want to remap. DSCP values range from 0 to 63.
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 148 | LPB2810A | |
|
|
