Chapter 2: System Configuration

2.4 IP (Internet Protocol)

IP is an acronym for Internet Protocol. It is a protocol used for communicating data across an Internet network.

IP is a "best effort" system, which means that no packet of information sent over is ensured to reach its destination in the same condition it was sent. Each device connected to a Local Area Network (LAN) or Wide Area Network (WAN) is given an Internet Protocol address, and this IP address is used to identify the device uniquely among all other devices connected to the extended network.

The current version of the Internet protocol is IPv4, which has 32-bits Internet Protocol addresses allowing for in excess of four billion unique addresses. This number is reduced drastically by the practice of Webmasters taking addresses in large blocks, the bulk of which remain unused. There is a rather substantial movement to adopt a new version of the Internet Protocol, IPv6, which would have 128-bits Internet Protocol addresses. This number can be represented roughly by a three with thirty-nine zeroes after it. However, IPv4 is still the protocol of choice for most of the Internet.

2.4.1 IPv4

The IPv4 address for the switch could be obtained via DHCP Server for VLAN 1. To manually configure an address, you need to change the switch's default settings to values that are compatible with your network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment.

Configure the switch-managed IP information on this page.

The Configured column is used to view or change the IP configuration.

The Current column is used to show the active IP configuration.

Web Interface

To configure an IP address in the Web interface:

1.Click System, IP Configuration.

2.Specify the IPv4 settings, and enable DNS proxy service if required.

3.Click Save.

Figure 2-8. The IP Configuration screen.

LPB2810A

724-746-5500 blackbox.com

Page 25

 

 

Page 25
Image 25
Black Box LPB2810A, LPB2826A, LPB2848A, PoE+ Gigabit Managed Switch Eco IP Internet Protocol, IP Configuration screen

LPB2848A, LPB2826A, LPB2810A, PoE+ Gigabit Managed Switch Eco specifications

The Black Box PoE+ Gigabit Managed Switch series, including the models LPB2810A, LPB2826A, and LPB2848A, presents a robust solution for businesses looking to enhance their network efficiency and reliability. Designed to support the growing demand for Power over Ethernet (PoE) devices, these switches provide the perfect backbone for modern network infrastructures.

One of the most significant features of this series is its PoE+ capability, which allows it to deliver power and data over a single Ethernet cable. This functionality simplifies cabling and installation, making it easier to deploy PoE devices such as IP cameras, VoIP phones, and wireless access points. The LPB2810A offers 8 PoE+ ports, the LPB2826A ups the ante with 24 ports, and the LPB2848A provides a whopping 48 ports, each capable of delivering up to 30 watts of power per port.

The managed switch system ensures that users can customize and optimize their network performance. With advanced features such as VLAN support, Quality of Service (QoS), and link aggregation, organizations can effectively manage traffic, prioritize critical applications, and potentially enhance overall network security. Furthermore, these switches support Layer 2 and Layer 3 functionalities, which allows for greater flexibility when implementing routing policies.

Another critical aspect of the LPB series is its built-in security features. The switches come equipped with advanced security protocols, including IEEE 802.1X port-based access control, which enables network administrators to authenticate devices before granting access to the network. This significantly reduces the risk of unauthorized access and ensures data integrity across the connected devices.

The Black Box PoE+ Gigabit Managed Switches are designed with reliability and ease of use in mind. Their fanless design promotes silent operation, making them ideal for deployment in both office environments and data centers. Additionally, the switches offer a user-friendly web-based interface and CLI options for straightforward management and configuration, catering to both novice and seasoned network administrators.

In conclusion, the Black Box PoE+ Gigabit Managed Switch series, featuring models LPB2810A, LPB2826A, and LPB2848A, stands out with its power-efficient design, extensive port options, and advanced security measures. These switches are an excellent choice for organizations that require a dependable and scalable networking solution to support their growing Ethernet and PoE device needs.