Black Box LPB2826A, LPB2810A, LPB2848A user manual Parameter Description Group Name

Chapter 2: System Configuration

Parameter Description

• Group Name

The name identifying the privilege group. In most cases, a privilege level group consists of a single module (e.g. LACP, RSTP or QoS), but a few of them contain more than one. The following description defines these privilege level groups in detail:

-System: Contact, Name, Location, Timezone, Log.

-Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection and IP source guard.

-IP: Everything except 'ping'.

-Port: Everything except 'VeriPHY'.

-Diagnostics: 'ping' and 'VeriPHY'.

-Maintenance: System Reboot, System Restore Default, System Password, Configuration Save, Configuration Load and Firmware Load, Web users, Privilege Levels, and everything in Maintenance.

•Privilege Levels

Every group has an authorization Privilege Level for the following subgroups: configuration read-only; configuration/execute read-write; status/statistics read-only; status/statistics read-write (e.g. for clearing of statistics). User Privilege should be same or greater than the authorization Privilege level to have the access to that group.

Page 24 724-746-5500 blackbox.com LPB2810A