Blackberry Z10 Security Type, CA Certificate, VPN Profiles, Band Type, Auto Obtain IP, Use Proxy

User Guide Settings and options

The SSID is the name that the network uses to identify itself. Usually, this field is automatically filled, but if the Wi-Fi network is hidden, you must enter the SSID to connect. and select the Hidden SSID checkbox.

Security Type

Set the security type that the Wi-Fi network uses. Depending on the network you're trying to connect to, you might also see Security Sub Type and Inner Link Security.

CA Certificate

Set the root certificate that your BlackBerry device should use to verify that it's connecting to the correct Wi-Fi network.

VPN Profiles

To use a VPN Profile when connecting to the network, select the profile that you want to use.

Band Type

This field is set to Dual Band by default. If the Wi-Fi network is dual-band, your device will try to connect in the 5.0 GHz band unless the signal strength at the 2.4 GHz band is significantly stronger. If you want to connect to a dual- band network using one band only, choose the band you prefer.

Auto Obtain IP

In most cases this option should remain checked, but if you need to manually specify an IP address for your BlackBerry device you can set this switch to OFF and the option to enter an IP address appears.

Enable IPv6

Set whether the network uses the IPv6 protocol.

Use Proxy

Set this switch to ON if you want to connect to a proxy server. When you select this setting, additional settings appear. To find out what settings to use, see the information provided for the proxy server.

Inter-Access Point Handover

If the network spans multiple access points, set whether your device should remain connected when you move from one access point to another.

Add a VPN profile

You need a Wi-Fi or VPN connection before you can add a new VPN profile.

You might have one or more VPN profiles on your BlackBerry device, depending on the options that your administrator sets for you.

If you use a work account that is supported by BlackBerry Enterprise Service 10, some VPN profiles might be automatically added and you don't have to manually add a VPN profile. If you don't see an option to add a VPN profile, then your administrator has turned off this type of connection.

1.On the home screen, swipe down from the top of the screen.

2.Tap Settings > Network Connections > VPN > Add.

3.Complete the fields. If you don't have the required information, contact your administrator.

244