PRE mode (static)
●If you only have one aerial con- nected to the unit and you have configured it in the setup menu (see “Setting the number of aeri- als”), the device uses one tuner to play the tuned station while at the same time using the second tuner to constantly search for the best available frequency for the tuned station (if the RDS function is acti- vated).
DDA digital directional antenna mode (static)
●If you have connected two aerials to the unit and have configured them in the setup menu (see “Set- ting the number of aerials”), the tuned station will be received using both aerials in DDA radio mode. The TwinCeiver continuously anal- yses the signals from both aerials and uses them to calculate a “clean signal” in order to reduce re- ception interference. This process has been developed by Blaupunkt and has a similar effect to using a directional aerial. Reception quality is considerably improved particular- ly in areas suffering from reception interference due to reflections from buildings and mountains, etc. In ex- ceptional cases, for instance if two different stations are received on the same frequency, an undesira- ble effect will be the result. If this is the case, you should select dynam- ic radio mode (see “Selecting the radio mode” immediately below).
There are five memory banks (DL1 - |
|
| DEUTSCH |
DL5) at your disposal in dynamic radio |
|
| |
mode. Whilst the station that is tuned |
|
| |
|
|
| |
into is being played, the second receiv- |
|
|
|
|
|
| |
|
| ||
er searches in the background for re- |
| ENGLISH | |
ceivable stations and displays the ab- |
| ||
breviated names of all receivable sta- |
| ||
tions alongside the softkeys in the mem- |
|
| |
|
| ||
ory bank. The stations are continuously |
| FRANÇAIS | |
updated ensuring that you always have |
| ||
access to all receivable stations. |
| ||
Selecting the radio mode |
| ||
|
| ||
|
| ||
To switch between the static and dy- |
| ITALIANO | |
namic modes, |
| ||
➮ press the TUNER button < in ra- |
| ||
dio mode. |
|
| |
|
| ||
The radio functions menu appears in the |
| NEDERLANDS | |
display. |
| ||
➮ Press the softkey 4 assigned to |
| ||
the “TUN2” display item. |
| ||
| SVENSKA | ||
The second page of the radio functions |
| ||
menu is displayed. |
| ||
➮ Press the softkey 4 assigned to |
| ||
|
| ||
the “DYNL” display item for dynam- |
| ||
ic radio mode. |
| ||
➮ Press the softkey 4 assigned to |
| ||
the “DDA” or “PRE” display item forESPAÑOL | |||
static radio mode. |
|
| |
To return to the main radio menu, |
| PORTUGUÊS | |
➮ press the TUNER button < twice |
| ||
or the joystick OK 7. |
| ||
The settings are saved. |
|
| |
|
| ||
DANSK | |||
|
| ||
63 |
|
| |
|
| ||
