DSA - EQUALIZER
Note:
●If you have already adjusted the graphic equalizer manually or if you have not yet carried out any cali- bration, “NO RESULT” will appear in the display.
➮Press the softkey 4 assigned to the “FRNT” display item for the front loudspeakers or “REAR” for the rear loudspeakers.
➮Press the softkey 4 assigned to the “VIEW” display item.
If you want to select the equalizer view without equalization,
➮press the joystick 7 repeatedly to the left or right until “PRE EQ” ap- pears in the display.
The equalizer setting is displayed.
If you want to select the equalizer view with equalization,
➮press the joystick 7 repeatedly to the left or right until “POST EQ” ap- pears in the display.
The equalizer setting is displayed.
To close the view,
➮press the joystick OK 7 or the MENU button 8.
Adjusting the graphic equalizer manually
You can also manually adjust the auto- matically ascertained values of the graphic equalizer.
➮Press the DSA button 5.
➮Press the softkey 4 assigned to the “USER” display item.
➮Press the softkey 4 assigned to the display item of the equalizer that you want to set up.
➮Press the softkey 4 assigned to the “ADJ” display item.
You can adjust the equalizer for the front and rear loudspeakers separately.
➮Press the softkey 4 assigned to the “FRNT” display item for the front loudspeakers or “REAR” for the rear loudspeakers.
The graphical equalizer settings are dis- played.
To select the frequency,
➮press the joystick 7 to the left or right.
➮Adjust the level for the frequency by moving the joystick 7 up or down.
The values appear graphically in the display whilst you are adjusting the equalizer.
➮Adjust all the settings for both channels as described above.
➮Press the joystick OK 7 or the DSA button 5 to close the menu.
The settings are saved.
78
