Note:
Set the volume on the navigation system to maximum. If the output sounds distorted, reduce the vol- ume slightly on the navigation sys- tem.
Press the MENU button 8.
Press the softkey 4 assigned to the “VOL” display item.
You can set the volume level at which the navigation voice output is “mixed in” with the audio source.
ADJUSTING THE VOLUME
You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio.
Activating navigation audio
You can either connect a second exter- nal audio source or a navigation sys- tem to this device. To do so, you must open the menu in order to set the de- vice that is connected.
Press the MENU button 8.
Press the softkey 4 assigned to the “SETP” display item.
Press the softkey 4 assigned to the “AUX2” display item.
Press the softkey 4 assigned to the “NAVI” display item if a naviga- tion system is connected.
Press the joystick OK 7 to save your settings or the MENU button 8 to close the menu without sav- ing.
Setting the minimum navigation

Setting the telephone volume level

You can set the volume of incoming tel- ephone calls.

Press the MENU button 8.

Press the softkey 4 assigned to the “VOL” display item.

Press the softkey 4 assigned to the “TEL” display item.

Set the required volume using the volume control 1.

Press the joystick OK 7 to save

your settings or the MENU button 8 to close the menu without sav- ing.

Note:

You can also adjust the volume

during the telephone call using the volume control 1. This setting ap- plies to the current call and is not saved.

Navigation audio

Instead of connecting a second exter-

nal audio source (“AUX2”, see “Exter-volumenal audio sources”), you can connect a navigation system.

If your car radio is connected to a navi- gation system and the navigation sys- tem outputs spoken information, the navigation voice output will be “mixed in” with the current audio source and will be outputted over the car radio’s loudspeakers.

This requires that the navigation sys- tem is connected to the car radio as described in the installation instructions and is activated in the menu.

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

DANSK

55

Page 13
Image 13
Blaupunkt CD72 operating instructions Navigation audio