TU tuner, CDC CD changer | Blaupunkt RDM 127 instruction

2+ / -

Adjusting the volume:

The volume can be adjusted from VOLUME +0 to VOLUME +80. Press + or - to adjust the volume in either direction in 15 increments per second.

Each time the set is switched on, it will play at the pre- adjusted volume level. The pre-adjusted volume level (VOL FIX) can be altered. Read the information in the section on “Programming with DSC – VARIOUS”.

Switching the volume to zero immediately:

Press ON briefly. MUTE will then appear in the display and the volume will be reduced to zero immediately.

Press ON again, and the set will resume playing at the vol- ume level last set.

The set will switch off automatically if it is set to mute for longer than 5 minutes.

3TIM (traffic memo) Setting the TIM times:

Press TIM for approximately 1 second.

Recalling stored traffic messages: Press TIM briefly.

Switching TIM off while using a car wash:

Press ON to switch the set off and then press TIM. TIM-FUNCTION DEACTIVATED will appear briefly in the display. The motor antenna will retract.

Be sure to read the section on “Traffic Memo (TIM)” for more important information.

4TU (tuner)

Press this key to switch to operating the radio (main menu). If you press TU while the radio is playing, the set will switch between the main menu and the menu selected last.

5CD

Press to switch to operating the CD player.

6CDC (CD changer)

Press to switch to operating the CD changer (optional).

If the Blaupunkt CDC F 07 changer has not been connect- ed, NO CHANGER CONNECTED will appear in the display.

7AUX

Press to switch to any additional equipment connected. Refer to “Accessories” to find out which auxiliary equipment can be added to this system.

6

Image 6

Blaupunkt RDM 127 operating instructions TU tuner, CDC CD changer

Contents

New York RDM Table of contents Traffic safety Accessories PrecautionsInstallation Important information Remote control RC Optional On / Mute Switching on/off Quick reference TU tuner CDC CD changer Display/Selection menu Display headerCD eject Open/close panel. Eject/insert CD Softkeys = Multi-functional rocker switch or remote control but Tons optional Radio modeAdditional functions for the rocker switch Inserting the KeyCard Flashing KeyCard tongue KeyCard anti-theft system Starting up the unit Removing the KeyCard Training the second KeyCard / replacing the KeyCardDSC-MAIN Menu Displaying the radio pass data Short Additional Memory S.A.MTurn On Message T.O.M Switching off the flashing light Optical indication of anti-theft protectionTaking care of your KeyCard Setting the clock First-time installationFirst Install Clock OWNER-ID AUX-IN Norm SET Exit Detailed operating instructions OWNER-ID Clear Exit First Install AUXAUX-NAME Exit L K M a N Clear Exit Resetting to original factory settings Switching to the radio mode Radio operation with RDS Radio Data SystemSelecting the waveband NDR Switching from the reception table to the preference tableSelecting a station NDR1 NDS By station search or manually LocalStore Exit Start the station search function by pressing Start Scan A NWith Scan End Scan FM stations Storing stationsStore Exit NDR Search Bremen Scan Select reception table to store stations Storing MW/LW stations Deleting stored stationLocal DX Store Select search menu to store stations Station name Alternative frequencySearch Scan Antenne NDR2 MDR Life NDR1 NDS Brocken PTY NDR1 NDS REG-E Text Switching the regional programme function on/offREG Regional programmes Regional Affairs Switching the PTY menu on/offPTY PTY Menu News Info Programme type PTY Menu News Switching PTY on / Selecting the programme type ActivateAffairs Giving radio stations a name Enter Clear Exit Search Scan Switching traffic announcement priority on/offTraffic message reception with RDS-EON Bremen 1 Bremen Bremen 3 HR 3 NDR1 NDS PTY Traffic Message Switching the warning beep offAutomatic start of station search TA OFF Exit Adjusting the volume for traffic announcements Adjusting the sound stage for traffic messages and TIMTreble Bass Fader Balance Exit Traffic Memo TIM TIM ActiveYour motor antenna may be damaged in a car wash Displaying the time Setting the exact timeHours Hours + MIN MIN + Exit Correcting the time Hours Hours + MIN Timer Programming the TIM standby mode / TIM timesTimer Timer Active Exit TIM NDR Hours Hours + MIN MIN + TimerRecalling stored traffic messages CUE TIM Active Timer TIM standby mode while the radio is switched offSwitching the TIM standby mode on/off Active TIM Active TIM-FUNCTION Deactivated Inserting a CD Switching to the CD modeOperating the CD player MIX CD Name Scan Repeat TPM TPM CLR Ejecting a CD Selecting a track Scan MIXScan Repeat TPM TPM CLR MIX CD Name Repeat TPM TPM CLR Repeat Repeating a track RepeatMIX CD Name Scan TPM TPM CLR TPM Programmed MIX CD Name Scan Repeat TPM Deleting the TPM memory TPM CLRMIX CD Name Scan Repeat TPM CLR TPM Track Clrd MIX CD Name Scan Repeat Giving CDs a name CDC Name Clear Exit V a L D Selecting the display mode TRACK/TIME Deleting the name of a CD CD Name Disc Empty Switching to the CD changer modeOperating a CD changer optional Disc Selecting a CD and a track Display header will indicate the current selection MIX Disc Scan Time Repeat TPM TPM CLR Scan TR MIX CDC Name Repeat a CD or a track Repeat Repeat Track MIX CDC Name Scan TimeTPM TPM CLR TPM Programmed MIX CDC Name Scan Time Repeat TPM CLR Disc TPM CLR TPM Track Clrd MIX CDC Name Scan Time Repeat TPM Disc Clrd MIX CDC Name Scan Time Repeat TPM CLR Prev CD Next CD Clear ExitDeleting the TPM memory for all of the magazines Deleting the name of a CD CDC Name L DPrev Next CD Clear Exit L D MIX CDC Name Scan Track Repeat TPM TPM CLR AUX mode Switching on AUX Loudness Audio settingsBass, treble, balance, fader Treble +5 Bass DNC Fader Balance Exit Loudness Loudness on Adjusting DNC DNC-ADJUST Stop DNC Adjusting DNC sensitivityDNC-LEVEL MID Treble Bass Fader Balance Exit Loudness AUTO-EQ2 EQ EqualizerEqualizer Menu AUTO-EQ1 View EQ AUTO-EQ3 MAN-EQ Exit EQ OFF Hi-fi calibration Start Hi-fi calibration Yesno View AUTO-EQ Front Left Next Exit Checking/altering Hi-fi calibration SET AUTO-EQ Front Left Calling up the Hi-fi calibration Setting the equalizer manually Calling up the manual equalizer setting Programming with DSC Car radios have been pre-programmed at the factory Table Size MENU-OFF Angle DSC-VARIOUS Menu Clock VOL FIX Beep KC LEDLoudness Exit Scantime DSC-KEYCARD Learn KC Read KC Exit VOL FIX Muting the audio source while using the car phone Specifications TunerCD player Blaupunkt telephone hotline Bosch Gruppe