If a NON Plug and Play System is Detected

IF A NON PLUG AND PLAY SYSTEM IS DETECTED:

1.A title screen is displayed when you run INSTALL. The IOSETUP utility will be copied to your hard drive.

2.Next, you will be asked to indicate which operating system you have:

•Windows 3.1, 3.11, Windows for Workgroups 3.11

3.Files are then copied to your hard drive and system files will be updated. Follow all on-screen directions. When done, the system will reboot.

4.Go to the \IO subdirectory which was created during the file copy process. Select a device(s) from the displayed list as appropriate.

ECP Printer Port A

ECP Printer Port B*

Comm Port A (HS)

Comm Port B (HS)*

IO Adapter 2x2 (or IO Adapter 1x1)

Quit Program

(* IO Adapter 2x2 only)