Bodum 11344 manual Assembly Instructions, Very warm welcome outside, Barbecue Assembly

FYRKAT

A very warm welcome outside!

What do we associate more with spring and summer than eating outside? And what is more perfect than the pleasure of a really first-class barbecue? Whatever you like best – a hearty steak, a crispy sausage or grilled vegetables – with the BODUM® “FYRKAT” Cone Grill you have made the right choice for a sociable summer. A barbecue is probably the only culinary event at which the proverb “Too many cooks spoil the broth” does not apply: When barbecuing, many cooks are at work. If you are not too easily seduced by rich sauces, grilled food is not only extremely tasty but also healthy and light, especially if you use lean meat, fish and vegetables.

Bon appetit!

All we would like to do now is to ask you to read these instructions carefully as they contain important safety and hazard warnings as well as useful barbecuing tips, and – of course – to wish you a wonderful summer.

With best wishes from the BODUM® Design Team

ASSEMBLY INSTRUCTIONS:

BARBECUE ASSEMBLY

1.M5 screws (8x)

2.M6 screws (6x)

3.M5 nuts (8x)

4.M6 nuts (6x)

5.M6 cap nuts (3x)

6.Washers Ø 5 mm (16x)

7.Washers Ø 6 mm (9x)

8.Lock washers Ø 6 mm (6x)

9.Positioning hooks (2x)

10.Handle

11.Motor retaining plate with grill utensil hooks

12.Barbecue motor (battery powered 1 x LR20/1.5 V / D, not supplied)

13.Support legs with bracket (3x)

14.Support legs with foot (3x)

15.Stabilizer

16.Grill grate-large

17.Rotary spit

18.Guide washer

19.Grill grate-small

20.Charcoal grate

21.Slit for rotary spit

22.Grilling bowl

23.Ash collector

24.Ventilation openings

25.Holding hooks-large

26.Holding hooks-small

Assembly Instructions

Figure A

Warning! Do not tighten the bolts and nuts too firmly in the following assembly step.

Place the grilling bowl (22) carefully on a level surface and attach each of the three support legs with brackets (13) to the grilling bowl(22). Use two M6 screws (2), two Ø 6 mm washers (7), two Ø 6 mm lock washers (8) and two M6 nuts (4) for each support leg. Then insert one support leg with foot (14) into each support leg with bracket (13) and fix the support legs using the stabilizer (15), washers (7) and cap nuts (5) as shown in figure A. Now tighten all screws and nuts on the barbecue sufficiently to ensure that they are sitting firmly.

Figure B

Place the barbecue on its support legs on a secure and level surface and attach the ash collector (23) to the grilling bowl (22). The ventilation openings (24) on the ash collector (23) can be opened and closed by turning the ash collec- tor. The ventilation openings (24) on the ash collector should wherever possible remain open to ensure that air can circulate sufficiently.

Now attach the handle (10) and the motor retaining plate with grill utensil hooks (11) to the grilling bowl (22) using M5 screws (1), Ø 5 washers (6) and M5 nuts (3).

2