Quick Start
To Control Volume
Note: Changing any of the volume, bass or treble levels will
effect all inputs associated with that amp/channel channel.
Turning up the volume for the current amp/channel will cause
other inputs assigned to that amp/channel to play louder when
they become active. Likewise for bass and treble.
Be sure VOL is the current control (this is the
normal default function). If BASS or TREB are
lit, press the VOL button. Its indicator will light
brightly and the volume level is displayed on the
LED pointer.
Press the arrow buttons on either side of the
pointer (left to decrease, right to increase).
The display shows A1 (the active amp/chan-
nel), VOL, and a 2-digit volume level number
(00-25). The number (and pointer) changes
in response to the arrow buttons.
After 5 seconds of no adjustment, the control
panel display will again show the current
input (VOL remains the current control and can
be adjusted at any time simply by pressing an
arrow key).
To Control Bass or Treble.
Select the desired function by pressing the
BASS or TREB button – its indicator lights.
The display shows BASS (or TREB), the current
active amp/channel (A1) and a 1-digit level
number (-7 to+7). The pointer shows the
approximate level.
Press the arrow buttons on either side of the
pointer. The number on the display changes
in response to the arrow buttons.
After 5 seconds of no adjustment, the amplifier
display will again show the current input and
VOL will again become the current function.
8
A1/bass 0
A1/VOL-10