![](/images/new-backgrounds/1186602/18660241x1.webp)
1200 and 1400 Series iSCSI Disk ArraysConfiguring the system en 21
3 | Configuring the system | |||
|
| This chapter provides information on preparing the iSCSI device before usage. These tasks | ||
|
| have already been performed on an iSCSI device that you just have purchased as all Bosch | ||
|
| DLA disk arrays come | ||
|
| not RAID protected on an iSCSI device, you must again perform some of these configuration | ||
|
| tasks. |
| |
3.1 | Disabling Windows Update | |||
|
| To disable Windows Update: |
| |
|
| 1. Open Server Manager. |
| |
| 2. | In the Security Information section, click Configure Updates, click Change Settings and | ||
|
|
| click to check Never check for updates. | |
| 3. | Click OK. |
| |
3.2 | Configuring Windows Firewall for iSCSI Software Target | |||
|
| You must configure the Windows Firewall to allow the necessary network traffic to pass. The | ||
|
| following table lists the required ports. | ||
|
|
|
| |
|
| Port or application | Description | |
|
|
|
| |
|
| TCP 3260 | Microsoft iSCSI Software Target Service. This port | |
|
|
|
| provides the primary access to the Microsoft iSCSI |
|
|
|
| Software target. |
|
|
|
| |
|
| TCP 135 | Remote Procedure Call (RPC), this port is required for | |
|
|
|
| Component Object Model (COM) communication. |
|
|
|
| |
|
| UDP 138 | NetBIOS Datagram Service, this exception should already | |
|
|
|
| exist for File and Print Service role, but may need to be |
|
|
|
| added manually if not present. |
|
|
|
| |
|
| %windir%\System32\Wintarg | Microsoft iSCSI Software Target Service | |
|
| et.exe |
| |
|
| %windir%\System32\WTStatu | Microsoft iSCSI Software Target status proxy | |
|
| sProxy.exe |
| |
|
| Note |
|
You may receive remote procedure call (RPC) errors when trying to remotely manage a Microsoft iSCSI Software Target if you do not configure the Windows Firewall exception for WTStatusProxy.exe.
The following table contains the Windows Firewall exceptions that should be made on the iSCSI initiator computer.
Application exception | Description |
|
|
%windir%\System32\Wtvds.exe | The Microsoft iSCSI Software Target VDS Hardware |
| Provider |
|
|
To add an inbound filter rule for a program:
1.Open Windows Firewall with Advanced Security. In Server Manager, expand Configuration, expand Windows Firewall with Advanced Security, and then click Inbound Rules.
2.In the Actions pane, click New Rule.
3.Under What type of rule would you like to create, click Program, and then click Next.
Bosch Sicherheitssysteme GmbH | Software Manual | Doc V1 2010.09 |