Solution 64 | User Guide |
Devices > Keypads > | |
Backlight | MENU |
This menu allows you to adjust the brightness of the keypad’s LCD display backlight. Each keypad can have their display adjusted separately.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [6] + [1] + [2].
The keypad will display the backlight screen.
Keypad 001 Backlight
L 
H
Press 
OK to SAVE
2.Use the [←] and [→] keys to adjust the bar until the desired backlight is reached.
3.Press [OK] to save and exit, or press [MENU] to exit without saving.
System Events
Options in this section relate to programming of system wide options and interpretation of system trouble events when and if they occur. Some events such as open zones will appear and single events while other may be grouped together. In this case you need to drill down to see the specific detail for each event. Your installer will advise you how to interrogate system trouble events.
System > Commands >
Panel Status | MENU |
The panel staus menu displays the panel software version information as well as highlighting any system troubles that are currently in effect. This is a view only location.
System > Commands >
System Trouble | MENU |
To determine the non system (zone) trouble condition, highlight the zone number Z001 to Z064) that you want to view using the [↑] and [↓] keys, then press [OK] to select.
P001 System Trouble
Z001 Zone 1 Name
Z002 Zone 2 Name
Press OK or MENU
2.If viewing system trouble conditions, the keypad will display similar to the following:
Panel 001 P001
Voltage= 13.9V Temp=36
Date And Time
Press OK or MENU
The third line of the keypad display scrolls between all current system trouble events.
If viewing
Zone 1 Name Z001
EOL = Open
Press OK or MENU
3.Press [OK] or [MENU] to exit the system trouble menu command:
If there are no system troubles, the keypad will display:
There are no
System troubles.
Press OK or MENU
The System Trouble Menu displays all current system troubles in a list format. Some trouble events require you to drill down and
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [7] + [0] + [1].
The keypad will display a list of all current system and non system trouble conditions.
To determine the system trouble condition, highlight the
panel number (P001 to P002) that you want to view using the [↑] and [↓] keys, then press [OK] to select.
P001 System Trouble
Z001 Zone 1 Name
Z002 Zone 2 Name
Press OK or MENU
Refer to the Trouble Messages table for a complete list of trouble events and their meanings.
24 | Bosch Security Systems |
09/06
BLCC110U
