Comms > Periodic Test >
Send Test Report | MENU |
This menu allows you to test the reporting functions of the Solution 64 control panel by manually sending a ‘Test’ report to the receiving party (i.e. security company monitoring station, mobile telephone etc).
1.Enter [MENU] + [5] + [9] + [0].
The keypad will prompt that it is in the process of sending a test report.
Comms testing in progress. Please wait..
To Go Back Press OK
If the test is successful, the keypad will prompt:
Communications Test
Successful
If the test is NOT successful, the keypad will prompt:
Test Report Failed
Please call for service
Press OK or MENU
2.Press [OK] or [MENU] to exit.
Devices and Optional Modules
Programming options in this section relate to the keypads and other devices which may be connected to your alarm system.Your installer will advise you on the exact makeup and configuration of your system.
Devices > Commands >
LAN Status | MENU |
This option provides a listing of all of the devices and modules connected to your system. Using this option it is poosible to view the voltage, temperature and other information about each of the modules.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [6] + [0] + [0].
Kp001 Keypad 001
Kp002 Keypad 002
Ox001 OutputX 001
Press OK or MENU
2.Use the [↑] and [↓] keys to select the device that you want to view, then press [OK] to select.
Solution 64 
User Guide
3.The display will show each parameter for the device one at a time on the third line of the screen.
Keypad 001 Kp001
Graphic + Prox V1.01
Volts = 13.87
Press OK or MENU
4.Press [OK] or [MENU] to exit.
Devices > Keypads >
Volume | MENU |
This menu allows you to adjust the volume of the keypad’s buzzer. Each keypad will need to have their volume adjusted separately.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [6] + [1] + [0]. The keypad will display:
Keypad 001 Volume
L 
H
Press 
OK to SAVE
2.Use the [←] and [→] keys or use the [↑] and [↓] keys to increase or decrease the volume of the keypad buzzer until the desired volume has been reached.
3.Press [OK] to save and exit, or press [MENU] to exit without saving.
Devices > Keypads >
Contrast | MENU |
This menu allows you to adjust the contrast of the keypad’s LCD display. Each keypad can have their display adjusted separately.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [6] + [1] + [1].
The keypad will display the contrast screen.
Keypad 001 Contrast
L 
H
Press 
OK to SAVE
2.Use the [←] and [→] keys to adjust the bar until the desired contrast is reached.
3.Press [OK] to save and exit, or press [MENU] to exit without saving.
Bosch Security Systems |
| 09/06 |
| BLCC110U | 23 |
|
|
