Bosch Appliances 9 6 BLCC110U manual Bypass Zones, Set Chime Zones, Z001 Zone 1 Name 

Solution 64 User Guide

Inputs > Commands >

Bypass Zones MENU 3-0-2

This menu allows you to bypass or un-bypass a single or multiple zones before you turn the area All On, Part On or Part 2 On. When bypassing zones, it disables the ability for a zone to detect intrusion and sound an alarm.

A burglary zone will automatically become un-bypassed when you turn the corresponding area off (disarm). Any 24-Hr fire or 24-Hr non fire zones will need to be manually un-bypassed.

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [3] + [0] + [2].

A list of zones that can be bypassed will display on the keypad. A ‘√’ displayed on the right side of the zone name indicates that the zone is already bypassed.

Z001 Zone 1 Name 

Z002 Zone 2 Name

Z003 Zone 3 Name

Press  OK or MENU

Inputs > Commands >

Set Chime Zones MENU 3-0-3

This menu allows you to program zones to be monitored when the system is turned off. Chime mode is ideal to monitor a front door to sound the keypad buzzer when opened (faulted).

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [3] + [0] + [3].

A list of areas will display on the keypad.

2.Use the [] and [] keys to select the area that you want to program zones for chime mode, then press [OK]. Alternatively, you can enter the area number that you want to program chime zones, then press [OK].

The keypad will list all zones that can be programmed for chime mode. A ‘’ displayed on the right side of the zone name indicates that the zone is already set for chime.

Z001 Zone 1 Name 

Z002 Zone 2 Name

Z003 Zone 3 Name

Press  OK or MENU

2.Use the [↑] and [↓] keys to select the zone that you want to bypass, then press [OK]. Alternatively, you can enter the zone number that you want to bypass, then press [OK].

If the zone is bypassed, the keypad will prompt:

Zone 1 Name Z001 is bypassed. To un-bypass, press OFF.

Press OK or MENU

If the zone is not bypassed, the keypad will prompt:

Zone 1 Name Z001 is un-bypassed. To bypass, press ON.

Press OK or MENU

3.Press [ON] or [OFF] to toggle the zone to be bypassed/un- bypassed.

4.Press [OK] to save and exit, or press [MENU] to exit without saving.

Repeat steps 1 to 4 to bypass or un-bypass additional zones.

3.Use the [↑] and [↓] keys to select the zone that you want to set for chime, then press [OK]. Alternatively, you can enter the zone number that you want to set for chime, then press [OK].

If the zone is not programmed for chime, the keypad will prompt:

Zone 1 Name Z001

Zone Chime is OFF,

To turn ON, Press ON.

To Go Back Press OK

If the zone is programmed for chime, the keypad will prompt:

Zone 1 Name Z001

Zone Chime is ON.

To turn OFF, Press OFF.

To Go Back Press OK

4.Press [ON] or [OFF] to toggle the zone to be monitored when chime mode is turned on.

5.Press [OK] to save and exit, or press [MENU] to exit without saving.

16 Bosch Security Systems

09/06

BLCC110U