Bosch Appliances 9 6 BLCC110U manual Icon, Meaning

Icon	Status	Meaning
	On	The area is turned off.
	Off	The area is turned All On or Part On
	On	The area is turned All On
	Off	The area is turned Off
	On	You have mail waiting to be read
	Off	No Mail
	On	Area is ready to turn on (All On / Part
		On)
	Off	Not ready, Zone Open
Red	On	All On
LED	Flashing	Alarm
Green	On	Area is off.
LED	Flashing	Area not ready to turn on
Red &
Green	Flashing	Installer programming mode is active.
LED

Table 3: Status ICONs, LED Indicator’s and Their Meanings

Keypad Tones

Your keypad emits several distinct tones and displays text to alert you to system events. Additional bells or sirens may also be connected to your system. Bells or sirens mounted on the exterior of your premises alert neighbours to emergencies and provide an audible guide for police and fire fighters.

Type			Meaning
Fire	When a fire zone sounds an alarm, the keypad
Alarm	will sound 3 seconds on and 2 seconds off
Tone	(repeat).
Burglary	When a	burglary	zone activates while your
	system	is turned	on, your keypad emits a
Alarm
	continuous siren tone. It sounds for the time
Tone
	set by your security company.
Trouble	When a system component is not functioning
	properly, your keypad sounds 4 fast short beeps
Tone
	followed by a 5 second pause (repeat).
Key	Pressing any key on the keypad sounds one
Press	short beep, indicating that the key press is
Tone	accepted.
	When you enter the premises through a zone
Entry	programmed for entry delay, the keypad sound
	a Hi/Low tone to remind you to turn off the area.
Delay
	If the area is not turned off before the entry
Tone
	delay expires, an alarm condition will sound and
	a report may be sent to your alarm company.

	Solution 64 User Guide
	After you turn an area All On, the keypad will
Exit	sound 1 short beep every second. During the last
Delay	10 seconds fast short beeps will be heard. If you
Tone	don’t exit before the delay time expires and an
	exit delay door is faulted, an alarm occurs.
Error	If you press an incorrect key, your keypad will
Tone	sound a 2 second tone.
Menu	The keypad will sound a Hi / Lo tone to indicate
	you have entered MENU Mode and a Lo/Hi tone
Mode
	to indicate you have exited MENU mode.
Chime	The keypad sounds fast short beeps to alert you
	when a zone programmed for chime is faulted
Tone
	or unsealled.
	Table 4: Keypad Tones and Their Meanings

Figure 1: CM100 Graphic Keypad

Bosch Security Systems 09/06 BLCC110U 7