DVAS Instruction Manual Bosch GUI | EN 22 |
|
|
7.4 Volumes
Click on a drive to view its information.
This page provides information on the volumes within the created array.
Figure 18 Volume Array
Available Information:
Information | Description |
|
|
Volume Name | |
|
|
Volume Capacity | Size of the volume in Megabytes; |
| [Gigabytes in brackets]. |
|
|
Percentage of Total | Displays the percentage of the entire |
Array Used | array capacity that’s used by the volume. |
|
|
Host 0/1 Target ID: | Displays the SCSI ID and LUN of the |
LUN | array, on both host channels. |
|
|
Volume Serial Number | Displays the volume serial number, which |
| may be required for some SCSI tasks. |
|
|
Volume Creation Time | Displays the time of volume creation. |
|
|
Volume Creation Date | Displays the date of volume creation. |
|
|
Figure 20 Drive Information
Available Information:
Information | Description |
|
|
Status | Displays ownership status. |
|
|
Capacity | Displays raw capacity of disk drive. |
|
|
Model | Displays manufacturer’s drive model |
| number. |
|
|
Serial Number | Displays serial number of the drive. |
|
|
Firmware | Displays current firmware level of drive. |
|
|
R/W Transfer Retries | Displays number of transfer retries |
| (normally 0). |
R/W Media Retries | Displays number of media retries |
| (normally 0). |
|
|
R/W Transfer Retries and R/W Media Retries can indicate problems with a disk. Retries are generally not harmful, but more than ten retries in a
7.5 Drives
This page provides extended information about the ATA disks installed within the array.
7.6 Progress
This page shows the progress of certain array utilities. The following progress is viewable on this screen:
Figure 19 Drive Array
Figure 21 Array Utilities
• Array Construct (create)
• Array Verify
• Array Reconstruct (rebuild)
• Consistency check
Bosch Security Systems 20 January 2004