Bosch Appliances DVAS instruction manual Security, Date and Time, Time and Date Configuration

DVAS Instruction Manual System Menu			EN 33
ATA RAID System-friendly Name		Time Server IP address for auto time and date
This aids in determining the location of a DVAS Series		configure allows selection of a time server manually,
disk array that has sent e-mail. This feature is useful for		or from the preconfigured list.
users with many systems, and is a friendly name
relating to the location or use of the unit.		Time Server time and date format. Select via drop
When to Send		down box.
Indicates the circumstances causing an e-mail to be		Set system time and date by the time server every
sent. The possible options are:
		24 hours defines whether the time server is updated
• Don’t Send E-mail Alarms		daily.
	This setting is only recommended for users who do	Once all settings have been entered, click Save
	not wish to receive any e-mails from the unit. Only
		Settings to apply them.
	an audible alarm will occur in case of a problem.
• Send E-mail Alarms for Errors Only		9.6 Security
	This setting is suitable for most users.	WARNING: Resetting the factory defaults also resets
• Send E-mail Alarms for Warnings and Errors		the password to the factory default, PASSWORD,
		which should be changed immediately to a secure
	This setting is ideal for expert users. Use the
		password.
	drop down menu to choose the desired option.
•	E-alert Settings	The DVAS offers two levels of menu security; User and
	Send automatic status e-mails. Set to either
		Administrator. The USER account allows browsing of
	Enabled or Disabled.
		many of the information pages and verification of
Click Save E-alert Settings to confirm the new		general product status. ADMIN access allows
settings. Reload this page and use Send Test E-mail		alteration of settings and entry to boot mode. By
Now to verify that the configuration works.		default, the password login for ADMIN is turned on.
9.5	Date and Time	The default passwords for USER and ADMIN are
		PASSWORD. Default passwords and usernames must
It is important to correctly set the subsystem’s date and		be entered in UPPERCASE.
time. E-mails sent from a DVAS Series disk array are

time stamped. To accurately gauge the time of an	WARNING: The DVAS should be connected only to
event, the time/date must be correct.
	secure networks. To guard against accidental or malicious
	tampering of the DVAS, the ADMIN password should
	be set to something impossible to guess.

Figure 42 Time and Date Configuration

Enter the date and time in the following format:

Date: dd/mm/yyyyFigure 43 Password Configuration

Time: hh:mm:ss

Time zone: (relative to GMT) via the drop down menu.

Bosch Security Systems 20 January 2004