Bosch Appliances FMR-1000-RCMD 7Address Setting, 8Programming, Option Bus, Dip

Remote Command CenterAddress Setting en 11

7Address Setting

Each FMR-1000-RCMD connected to the Option Bus of the FPA-1000 must be set to a unique Option Bus address ranging from 16 to 23. The devices must also be programmed at the control panel (refer to FPA-1000 Installation and Operation Guide (P/N F.01U.173.607).

The address is set using the DIP switches at the main board of the annunciator unit. Refer to Table 7.1.

G	Y	PWR+ GND
	P7		P3

ON				DIP
1	2	3	4	5

ON	ON			DIP
OFF	1	2	3	4	5
Figure 7.1	Address Setting

ON	ON				DIP	16
OFF	1	2	3	4	5
ON ON					DIP	17
OFF	1	2	3	4	5
ON ON					DIP	18
OFF	1	2	3	4	5
ON ON					DIP	19
OFF	1	2	3	4	5

ON	ON				DIP	20
OFF	1	2	3	4	5
ON ON					DIP	21
OFF	1	2	3	4	5
ON ON					DIP	22
OFF	1	2	3	4	5
ON ON					DIP	23
OFF	1	2	3	4	5

Option Bus	DIP 1	DIP 2	DIP 3	DIP 4	DIP 5
Address
16	OFF	OFF	OFF	OFF position:	OFF position:
				Control keys	Key lock
17	ON	OFF	OFF
				are locked.	active.
18	OFF	ON	OFF
19	ON	ON	OFF	ON position:	ON position:
20	OFF	OFF	ON
				All keys are	Key lock
21	ON	OFF	ON	locked.	bypassed.
22	OFF	ON	ON
23	ON	ON	ON

Table 7.1 DIP Switch Function

The DIP switch 4 allows for locking the control keys (drill, reset and silence) in OFF position and for locking all keys in ON position.

The DIP switch 5 enables the device’s key lock in OFF position and bypasses the key lock in ON position.

NOTICE!

Each Option Bus device must have its own address, and each address can support only one device. Ensure that there are no duplicate addresses on the bus.

8Programming

All Remote Annunciators and Remote Command Centers have to be configured as elements connected to the Option Bus.

The FPA-1000 enables various programming approaches:

–On-site at the front panel to program another panel, but not all parameters can be programmed

–On-site through a Web server using a laptop (connected to the panel with CAT5 cable)

–Remote, using a Web page and a dial-up connection

Bosch Security Systems, Inc. Installation and Operation Guide F.01U.078.098 3.0 2011.11