Bosch Appliances FMR-1000-RCMD Operating, LEDs and LCD Keypad, Led, System Status

12 en Operating Remote Command Center

–Remote, using a Web page and an Ethernet connection.

For front panel programming, the system provides an auto learn function, allowing the installer to configure the system quickly and easily in default mode.

Using a local laptop or remote access through a communicator, the programming is carried out by means of browser-based user interface (virtual keypad).

Refer to the FPA-1000 Installation and Operation Guide (P/N F.01U.173.607) for detailed programming instructions.

9	Operating
9.1	LEDs and LCD Keypad
	The LEDs on the Remote Command Center follow the global system status (refer to

Table 9.1). In addition, a communication fault on the Option Bus is indicated by the trouble LED flashing at 1 Hz (refer to Section 10 Troubleshooting on Page 15).

Legend

1LEDs

2Device key

3 LCD screen

4 Scroll keys

5Keys for Drill, Reset, Silenced, and Acknowledge [ACK]

1

2

3

5

1

4

5

				Figure 9.1 Front View FMR-1000-RA
	LED		System Status
Fire		On	Whenever the system registers a fire alarm and is not reset
Red
		Off	– If no alarm registered
			–	After resetting
Gas Alarm		On	When the system registers a gas alarm and is not reset
Blue
		Off	– If no gas alarm registered
			–	After resetting
Power		On	If AC power is applied to the panel
Green
		Flashing 1)	When AC power fails and the unit operates from battery power
		Off	When no power (AC or battery) is applied
Supervisory		On	When the system registers a supervisory condition
Yellow
		Off	When no supervisory condition is registered
Silenced		On	– When an alarm or trouble condition is silenced manually by the user
Yellow			– If the system auto-silence timer expires
		Off	– When no condition is silenced
			– When a silenced condition is corrected

F.01U.078.098 3.0 2011.11 Installation and Operation Guide Bosch Security Systems, Inc.