Bosch Appliances FMR-1000-RCMD Display, Piezo Sounder, Piezo Operation System Status

Remote Command CenterOperating en 13

LED		System Status
Trouble	On	–	When the panel is initializing
Yellow		–	When the panel registers a trouble condition from a point, or the panel

–When inputs or outputs or other elements are bypassed

Flashing 1) – When the panel is not operating

–When walk test is in progress

Off – When no trouble condition exists

–When the panel is resetting

1)LED flash rate is 1 Hz (0.5 s on, 0.5 s off).

Table 9.1 LED Operation

Display

The FMR-1000-RCMD Remote Command Center uses an 80-character (4 lines x 20 characters) wide viewing-angle LCD display. The display includes a long-life LED backlight. The backlight is controlled by the panel, or locally turned on upon any key press and turned off after

30-second time-out without key press. Even when AC power is lost, the LED backlight remains lit if a user is operating the keypad.

Piezo Sounder

The FMR-1000-RCMD Remote Command Center has a piezo that provides audible indication of the system status. Refer to Table 9.2 for piezo modes when FMR-1000-RCMD is controlled by the panel:

Piezo Operation	System Status
Silent	The panel is in a normal state (no alarm, supervisory or trouble
	condition). The panel was silenced or acknowledged after an off-
	normal condition.
Continuous beep	The panel is in fire alarm condition.
Periodic beep	The panel is in gas alarm condition.
(0.5 s every 2 s)
Periodic beep	The panel is in supervisory condition.
(0.5 s every 4 s)
Periodic beep	The panel is in trouble condition or a communication fault exists
(0.5 s every 10 s)	on the Option Bus.
Short beep	With every valid key press.

Table 9.2 Piezo Operation with FMR-1000-RCMD Panel Controlled

In case of multiple piezo activation, the system status with highest priority is indicated. If the Remote Command Center is not controlled by the panel or during a communication fault, refer to Table 9.3 for piezo modes:

Piezo Operation	System Status with FMR-1000-RA Controlled Locally
Periodic beep	A communication fault exists on the Option Bus.
(0.5 s every 10 s)

Table 9.3 Piezo Operation with FMR-1000-RCMD Controlled Locally

Bosch Security Systems, Inc. Installation and Operation Guide F.01U.078.098 3.0 2011.11