Getting Started

Removing and Replacing

Note: The full extension rack must be in the closed position when removing and replacing. Grasp the entire rack (both sections).

1.Grasp the bottom section and pull straight out.

2.Once the stop is reached, grasp the top section and pull straight out until the second stop is reached. If the top rack will not extend fully, it is not installed correctly. Reinstall it so that the pan stop is in the back of the oven.

Disassembly (for cleaning)

The two sections of the rack are designed to come apart for easier cleaning.

1.Place rack on flat surface in the closed position top side up.

2.Rotate one side of top rack towards you until it is past the stop (ball).

3.Pull the rack up and out, rotated side first.

Closed Position

Back of Rack

 

Stop (Ball)

Front of Rack

Figure 6: Disassembly

Reassembly

CAUTION

Always verify that top rack is installed correctly after reassembly. The back edges of the top rack must be under the rack guide on the bottom rack. DO NOT simply rest the top rack on top of the bottom one.

1.To reassemble rack, hold top rack diagonally across bottom rack.

2.Insert one side of top rack to closed position.

3.Rotate the other side toward the back of the rack until it passes the stop (ball).

4.Push top rack the rest of the way in (See Figure 3).

Closed Position

Back of Rack

 

Stop (Ball)

Front of Rack

Figure 7: Reassembly

English 9