Getting Started

Table 2: Oven Control Panel

Clock– Shows the time of day with a 12 or 24 hour option.

Off - Press pad to turn off oven and/or warming drawer.

Also displays the timer and times associated with delayed

Oven Temperature - Shows the oven temperature.

cooking and cleaning modes. Turn the control knob to tog-

Preheat Temperature - Displays temperature of oven dur-

gle between timer and clock display. Press Time and turn

the control knob to change the time of day or the

ing preheat mode.

timer.

 

Probe Indicator (some models) - Indicates that the probe

 

 

Cooking Mode - Press pad to display cooking mode.

is properly inserted into the probe receptacle in the oven.

Cooking Mode Icon – Shows the cooking burners that

Start - Press pad to complete an entry.

are active for the mode that is selected. The icon will also

Temperature - Press pad to select cooking temperature.

display a fan if the convection fan is utilized in the selected

Time - Press pad to set or change the time of day or the

mode.

 

Control Knob - Used to set the clock, timers, select cook-

timer.

Timer – There are two timers - TIMER 1 AND TIMER 2;

ing mode and temperature. Turn clockwise to increase and

turn counterclockwise to decrease.

 

Each counts down the time in hours and minutes. With

Light - Press pad to turn oven light on or off.

less than 60 minutes remaining, the timer also displays

seconds. Press Time to access the timers.

Door Locking Indicator - Icon is displayed during the

Warming Drawer Indicator - Indicates that the warming

self-clean mode when the door is locked. DO NOT attempt

drawer (some models) is on. Also displays the warming

to open the door until the lock symbol is no longer present.

drawer setting.

 

 

 

 

 

 

You control the operation of the range by using the touch pads, dial and control

 

knobs.

 

 

The touchpads, in conjunction with the dial, are used to select an oven mode, set

 

the oven temperature, set the time(s) and to set up your range. To use the touch-

 

pad, press the center part of the pad with the flat part of your fingertip. A beep will

 

sound to indicate that the selection has been made. Turn the dial to the desired

 

setting and press start.

 

The knobs are used to control the heat level of the burners. Push down and turn

 

to the symbol to light and then to the desired heat setting.

 

See the sections on Using the Cooktop, Using the Oven and Using the Warming

 

Drawer for detailed instructions.

The Clock

 

 

About the Clock

• Always set the clock after installation or after a power failure. Once power

 

returns to the oven, the clock defaults to 12:00 am.

 

• The time of day is displayed in hours and minutes.

 

• The clock time will appear during all oven operations except when the timer is

 

running.

 

 

• The oven is preset to a 12 hour clock and indicates AM and PM. To switch to

 

a 24 hour clock, see "Select Function” section.

 

• If you do not complete the operation of setting the clock, the oven will beep

 

periodically as a reminder to set the clock time. Press OFF to stop the beep-

 

ing.

 

Setting the Clock

1. CLOCK will be displayed and the hour digits

12:

 

00 AM

 

 

 

 

will flash. Turn knob to select hour and AM or

 

CLOCK

 

PM.

 

 

 

 

 

 

 

 

2.Press Time. CLOCK will still be displayed and the minute digits will flash.

3.Turn knob. Set minutes.

English 12