Triple Element Control Knob (some models)
To turn on the small inner element only, push in on the
control knob and turn it to the 
symbol (counterclockwise). Turn knob left or right to set the heat level.
To turn on the inner and middle elements, push in and turn
the control knob to the 
symbol. Turn knob left or right to set the heat level.
To turn on all three elements, push in and turn the control
knob to the 
icon. Turn knob left or right to set the heat level.
For each of the three element sets (A,B,C) the unit temperature can be adjusted from LO to HI to provide a more precise temperature setting.
Surface Element On/Hot Indicators
There is an embedded panel near the front of the cooktop with individual lights representing each element. These lights are illluminated when an element is “on”. The light remains on as long as the element is hot. When the element is sufficiently cooled down, the light goes out.
Cooktops with a triple front element
Cooktops with a double front element
Warming Zone
The warming zone is controled through the oven control panel.
To turn on the warming zone
1.Press the Warming Zone touchpad.
2.Press Enter.
To turn off the warming zone
1.Press the Warming Zone touchpad.
English 11
Surface Elements Disabled During Self Clean (some models)
9WARNING
To avoid risk of personal injury, while the self clean cycle is operating, do not operate the cook top and ensure that all surface controls are turned off.
All surface elements are automatically disabled during Self- Clean Operation only. This is normal. Once the
