Bosch Appliances Nexxt DLX manual Rinse is litSuds or pump is blocked, E04 with no water re6, Spun

Fault		Possible	cause		Action
Water cannot	be seen in This is not		a fault.
drum.		The water level is below the visible		part of the drum.
Indicator light	•rinse" is litSuds or pump is blocked.				Use less detergent for future	wash	loads.	Detergents
and display is	flashing				specifically designed for you High Efficientcy washer
•E:04" with no water re6					produce fewer suds and will	include	the	letters	•HE"
maining in tub.					on the packaging. Clean the water drainage pipe
					and/or drain hose. Turn the	program selectoroff" to			•
					and restartDrain program.

Water is flowing out fr underneath the machine

Suds coming out of th detergent dispenser.

The thread of the supply hose is not tight.

Leak in the drain hose.

Too much soap or non-HE soap used, pump not remove suds.

Tighten		the	thread.
Replace		the	drain	hose.
Mix	1	tablespoon		of fabric softener with½ 1litre)pt (
of	water and pour			into detergent dispenserIII.

Use less detergent for future wash loads.		Detergents
specifically designed for you High Efficientcy washer
produce	fewer suds and will include the	letters •HE"
on the	packaging.

Repeated

spinning.

This

is not

a fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is

attempting together.

balance the

load

through repeated spins.

The laundry

was

not

Large

items

of clothing

have become

entangled andAlways

load

the

drum

with

andlarge small

items

spun.

could

not be distributed

evenly in the

drum.

For togethersafe6.

ty reasons the high7speed spin cycle

was automati6

cally

suppressed.

Program

duration

ex6

This

is not

a fault.

Add a more appropriate amount of detergent.

tended.

The

suds detection feature has activated

an addi6

tional

rinsing cycle to reduce the amount

of

suds.

This is not a fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is

attempting together.

balance the load through repeated spins.

Unsatisfactory

washing

The

degree

of soiling was

higher than

estimated. Select

suitable program

result.

or

Power

Wash as

an additional

option.

Not

enough

detergent.

Add detergent according to the manufacturer's

specifications.

Detergent

residue

on the

Some phosphate6free detergents contain

water6insol6Brush off spots when laundry is dry.

laundry.

uble

residues that may appear as light spots

on

the

laundry.

Gray residue on the laun6Dirt

accumulation

from

ointments,

fats

or

oils.

Add the maximum amount of

detergent

and

select

dry.

the

highest

permissible

temperature.

System

shakes

or

Drum

system suspension can shift during

speed

up,Mix

small

and

large laundry

pieces

in

load

to

shudders

when

passing

this

is not

a failure.

minimize this

effect.

from lower

to

higher

speed

spinning.

If the fault cannot be eliminated with the aid of the

above

table,

switch

the appliance

off,

wait 5

seconds

appliance

on

again, select

and

start

the

program.

If the

fault

continues,

call

customer

service;

see

Page

27.

26