Bosch Appliances Nexxt DLX manual Water drainage In-Wall Installation, Drainage into a siphon

q Use a strap or cable tie to hold hose in place.

q When the water is being drained, check that the water flow out of the sink is adequate.

q Attach water drain hose securely to sink.

- Install the transport bolts.

Transport, such as when moving out

Before transporting the washing machine:

- Turn off the water.

- Disconnect the washing machine from the power outlet.

- Dismantle the supply and drainage hoses.

Water drainage In-Wall Installation

CAUTION

Do not bend or pull the water drainage hose.

Height difference between the installation location of the washing machine and the drainage point: Maximum 8 feet / 244 cm.

Connecting the water drainage hose

qUse the elbow. Attach the elbow to the end of the hose

and insert end of hose into walli drain.

qUse a strap or cable tie to hold hose in place.

Drainage into a siphon

Having transported the appliance and ensured proper installation and connection, allow theDrain program to run through before starting the first wash program.

Preparing and inserting the transport bolts

qAttach the drain hose to the end of the drain connection.

qSecure the connection point with the clamp and tighten.

Standpipe Installation

qUse the elbow. Attach the elbow to the end of the hose and insert end of hose into standpipe.

qSecure the connection point with a hose clip(not included in

factory-supplied equipment). q Remove the covers.

Drainage into	a sink	q	Prepare the			transport		bolts:
			Loosen the screw in the sleeve
CAUTION			until	the	end of the screw is
			level	with	the end of the sleeve.
Ensure that the	plug is not in the		Insert	and		tighten	all	transport
drain hole.		q
			bolts.	Make		sure	that	the tab o
			the transportation				bolt	is
			inserted in the slot on the
			washing machine				back	panel.

qUse a strap or cable tie to hold hose in place.

11