Chapter 3: Installation and Operation
3-1 Installation
Hopper Piece
Processing
Machine
Direction of Material Flow
Figure 4. Digital Dosing Feeder Assembly
1.The Digital Dosing additive feeder is not affected by machine vibration, so the best performance is achieved by mounting the feeder directly on the feed throat of the molding machine or extruder (see Figure 4). The inlet into the process machine must be greater than 2” diameter, or an adapter may be necessary. If an adapter is required, it must be designed so that there are no edges where material can hang up - it must be smooth to promote consistent material flow.
882.01749.00 | 31 of 93 |
