Bosch Power Tools 1619EVS manual Dust Collection While Edge Forming, Do not use this dust

BM 2610933969 09-12_BM 2610933969 09-12.qxp 9/20/12 9:19 AM Page 15

DUST COLLECTION WHILE

EDGE FORMING

The RA1170 dust extraction hood (optional accessory) is used for dust collection when edge-forming (Fig. 15).

Read and understand these ! WARNING instructions and tool

manual for use of these accessories.

Do not reach in area of the bit while the router is ON or plugged in.

! CAUTION	To avoid entangling hoses,	ROUTER
	do not use this dust	SUB-BASE
extraction hood at the same time as any
other dust extraction hood.
ATTACHING DUST ExTRACTION HOOD
You can attach the hood in several places		WORKPIECE
according to your needs or preferences. This		EDGE
hood is attached using two of the screw holes		DUST
on the router base that are used to attach the
		ExTRACTION
router’s sub-base. Choose the desired
		HOOD
location for the hood. Loosen and take out the
two screws from the router base and attach
the dust extraction hood — over the router’s		The dust extraction hood itself is sized to
sub-base — using the screws provided with		accept 35mm vacuum hoses. Also included is
the hood. Securely tighten the screws (Fig.		the VAC002 adapter that will connect the
16).		hood to 1-1/4’’ and 1-1/2’’ vacuum hoses.

	M4 x 16mm
FIG. 16
	SCREW

DUST

ExTRACTION

HOOD

SUB-BASE

M4 x 16mm

SCREW

-15-