BM 2610034445
•To drive the nail deeper, turn the adjustment knob “too shallow” icon, see figure 11.
4.Reload nails as described in the “Nail Loading” section of this manual.
5.Reconnect battery pack.
!WARNING Know what is behind your work piece. Do not fire
nails into walls or floors without assuring the area on the opposite side is clear. A nail could travel through the work piece, striking someone.
jAM CLEARING Disconnect the battery pack from tool before attempting
to clear a jammed nail. Such precautionary safety measures reduce the risk of unintentional tool operation.
If a nail becomes jammed in the nosepiece, follow these instructions to remove the jammed nail:
1. Release the trigger.
FIG. 12
2.Disconnect the battery from the tool.
3.Remove nails from the magazine as described in “Nail Unloading.”
4.Open the nose of the tool by pulling quick release lever forward. Pull open the nose of the tool to access the nail jam, see figure 12.
5.Remove the nail, using pliers if necessary.
6.Close the nose of the tool by hooking the spring of the quick clear lever on the two hooks on the nose. Press the lever closed, see figure 13.
7.Reinsert nails into the magazine as described in “Nail Loading”.
8.Reconnect battery.
NOTE: If the driver blade does not return to its up position, disconnect battery and contact a Bosch factory service center or authorized Bosch service station.
NOTE: If nails continue to jam frequently in the nose piece, contact BOSCH service center for repair.
FIG. 13
