BM 2610034445
9.Simply push back into place (Fig. 39).
10.Locate driver block assembly replacement. NOTE: Ribbed side of assembly should face down (Fig. 40).
11.Locate and reattach guide sleeves to lower portion of driver block assembly (Fig. 41).
12.To ensure proper alignment of rubber cords, guide sleeves must be properly installed. See Figure 42 for correct orientation.
13.Hold guide sleeves and rear tabs securely to driver block assembly with one hand while holding frame with guide rails in the other hand. Insert guide rails into holes in guide sleeves (Fig. 43).
14.Replace rubber cords. Align rubber cords with tabs on the back of the frame first (Fig. 44).
FIG. 39
FIG. 40 |
FIG. 41
FIG. 42
FIG. 43
FIG. 44
