Bosch Power Tools FNH180K-16, FNH180-16BN manual

BM 2610034445 03-14_FNH180 3/27/14 11:52 AM Page 25

21. As driver blade is inserted into blade	23. Pins should stick out an equal length from
opening, align both guide rails into rail	both sides (Fig. 53).
holes on both sides (Fig. 51).	24. Place metal top cap back on tool.
22. Securing driver sub-assembly to tool.	Replace allen screws (Fig. 54).
Frame assembly should align with
mounting holes for pins. Insert both pins
and push in (Fig. 52).

FIG. 51 FIG. 53

FIG. 52

FIG. 54

-25-