BM 2610034445 03-14_FNH180 3/27/14 11:52 AM Page 14
Maintenance
Service
Maintenance performed by
!WARNING unauthorized personnel may result in misplacing of the internal components which could cause serious hazard. We recommend that all tool service be performed by a BOSCH factory service center or authorized BOSCH service station.
Contact your BOSCH service center for instructions and the following user replaceable parts; rubber cords, and driver block assembly.
For all other repairs contact your BOSCH service center.
BATTERIES
Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance or significantly shorter running time between charges then it is time to replace the battery pack. Failure to do so can cause the tool to operate improperly or damage the charger.
TOOL LUBRICATION
Your Bosch tool has been properly lubricated and is ready for use.
D.C. MOTORS
The motor in your tool has been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend it be examined every six months. Only a genuine Bosch replacement motor specially designed for your tool should be used.
Cleaning
To avoid accidents, always disconnect the tool and/or charger from the power supply before
cleaning. The tool may be cleaned most effectively with com pressed dry air. Always wear safety goggles when cleaning tools with compressed air.
Do not attempt to clean by ! WARNING inserting pointed objects through opening. Sharp edges may damage internal components causing a
serious hazard.
Ventilation openings, the work contact element, and the trigger must be kept clean and free of foreign matter.
Clean the magazine. Remove plastic or wooden chips which may have accumulated in the magazine.
Certain cleaning agents ! CAUTION and solvents damage
plastic and rubber parts. Some of these are: gasoline, car bon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.
Storage
When not in use, the tool should be disconnected and stored in the storage case in a warm and dry place.
Do not store the tool in a cold weather environment.
! WARNING | Keep out of reach of |
children and personnel |
unfamiliar with tool operation. Lock the storage area. Tools are dangerous in the hands of personnel unfamiliar with the tool.
