Bosch Power Tools FNH180-16BN, FNH180K-16 manual PIN #1

BM 2610034445 03-14_FNH180 3/27/14 11:52 AM Page 22

3.Locate pin #2. To remove, use pin #1 and push pin #2 from either side until enough of the pin has been exposed. Remove completely. Place both pins in secure place for reassembly (Fig. 33).

4.Remove Driver Sub Assembly. Holding tool securely with one hand, use other hand to remove driver sub-assembly by grabbing both sides and then pull directly back (Fig. 34).

5.The Driver Sub Assembly consists of 5 parts (Fig. 35):

A) Driver Block Assembly (1)

B)Guide Rails (2)

C)Guide Sleeves (2)

D)Return Frame (1)

E)Rubber Cords (2)

6.Remove rubber cords and pull driver block assembly away from return frame and guide rails (Fig. 36).

7.Remove guide sleeves away from driver block assembly (Fig. 37).

8.If rubber bumper and guide rail become detached from return frame, re-attach rubber bumper and guide rail as shown (Fig. 38).

FIG. 33

PIN #2

PIN #1

FIG. 34

FIG. 35

	C
B
A
	D	E
B	C

FIG. 36

FIG. 37

FIG. 38

-22-