110
Insert Effect Parameter Functions
Rev0.10
The wah effect creates a unique tone by changing the
frequency response characteristics of a filter.
Touch wah creates an automatic wah by changing the filter
in response to the volume of the input. Pedal wah lets you
use an Expression pedal or the like to obtain real-time
control of the wah effect.
* You can use this effect with the following algorithms when
“WAH” is selected for the 4BAND EQ/WAH “Type”
setting.
COSM GTR AMP COSM BASS AMP
COSM COMP GTR COSM COMP BSS
BASS MULTI STEREO MULTI
On/Off OFF, ON
Turns the touch wah/pedal wah effect on/off.
Type
Selects either touch wah “TOUCH” or pedal wah “PEDAL.”
TOUCH :
The effect will function as a touch wah.
PEDAL :
The effect will function as a pedal wah.
■
When “TOUCH” is selected
Polarity
Selection for the direction in which the filter will change in
response to the input.
UP :
The frequency of the filter will rise.
DOWN :
The frequency of the filter will fall.
Sens 0 – 100
This adjusts the sensitivity at which the filter will change in
the direction determined by the polarity setting. Higher
values will result in a stronger response. With a setting of
“0,” the strength of picking will have no effect.
Frequency 0 – 100
This adjusts the center frequency of the Wah effect.
Peak 0 – 100
This adjusts the amount of wah effect applied. Lower values
provide a mild wah effect, while higher values result in a
sharper wah sound.
With a value of “50” a standard wah sound will be produced.
Level 0 – 100
Adjusts the volume.
■
When “PEDAL” is selected
The effect of the wah pedal can be obtained by operating
the Expression pedal.
For a detailed explanation, refer to “When Using an
Expression Pedal” (p. 191).
Peak 0 – 100
This adjusts the amount of wah effect applied. Lower values
provide a mild wah effect, while higher values result in a
sharper wah sound.
With a value of “50” a standard wah sound will be
produced.
Level 0 – 100
Adjusts the volume.

Wah