Rev0.10
121
Section 3

Using the Track EQ

This section explains how to edit the Track EQ settings
(parameters).
For a fuller description of Track EQ, refer to
“Track EQ Parameter Functions” (p. 122).
1
Confirm that [PAD] is not lit, then press [PAN/EQ/
LOOP FX].
2
Press CURSOR [ ] [ ] to move the cursor to
“EQ,” and press [ENTER].
The EQ Setting screen appears in the display.
fig.03-590
3
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to set the EQ On/Off for each track.
* Pressing a REC TRACK button moves the cursor to the
track corresponding to the button pressed.
4
To change the EQ settings, press CURSOR [ ]
[ ] repeatedly to display the parameter screen,
then turn the TIME/VALUE dial to change the
settings value.
fig.03-600
5
After you have completed the setting, press [EXIT]
repeatedly to return to the Play screen

Setting the Track EQ

Track EQ do not have “patches.” Loop effect settings
are saved along with the song data.
If you want to save the settings in the currently
selected song, hold down [STOP], and press [REC].