86
Rev0.10

Organizing the Songs You’ve Recorded

Follow the procedure below to copy the currently selected
song.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“EDT,” and press [ENTER].
fig.02-620
3
Press CURSOR [ ] [ ] to move the cursor to
“CPY,” and press [ENTER].
The Copy Song screen appears in the display.
fig.02-630
4
Press [ENTER].
The copy is executed.
When the copy has been completed, “Completed!”
appears in the display, and you are returned to the
Play screen.
Follow the procedure below to erase a song from the memory card.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“EDT,” and press [ENTER].
fig.02-640
3
Press CURSOR [ ] [ ] to move the cursor to
“ERS,” and press [ENTER].
The Erase Song screen appears in the display.
fig.02-650
4
Turn the TIME/VALUE dial and select the song to be erased.
5
After selecting the song to erase, press [ENTER].
“Are you sure?” appears in the display.
6
To continue with the erasure, press [ENTER].
To cancel the operation press the [EXIT] (or [UTILITY]).
7
Press [UTILITY] (or press [EXIT] repeatedly)
repeatedly to return to the Play screen.

Copying a Song (Song Copy)

If “Card Full!” appears
If this message appears before the copy, it means that
there is insufficient space on the memory card to
complete the copy. Delete any unnecessary recording
from the memory card.

Erasing Songs (Song Erase)

If you erase a song currently being used, the song on the
memory card with the lowest number is selected. If there
are no other songs on the card, a new song is created.