Boss Audio Systems BR-600 No Song!, Not Available in Mastering Mode!, Power Down!, Protected!, Set the Repeat!, Stop P.Trainer!, Stop Recorder!, Too Many Songs!, Unformatted!, Unsupported Card!, Unsupported Format!

217
Error Messages
Rev0.10
Section 7
No Song!
Cause : There are no songs on the memory
card.
Solution : Create a new song (p. 54).
Cause : Incorrect data is in the song folder, or
the necessary data is not present.
Solution : Restore the data backed up on the
computer to the BR-600. In this case,
restore each “ROLAND” folder to the BR-
600 (p. 165, p. 179).
Not Available in Mastering Mode!
Cause : You cannot carry out this operation with
“MASTERING” selected as the recording
mode.
Solution : First press the [REC MODE] button to
switch the recording mode to “INPUT”
or “BOUNCE,” then proceed with the
operation.
Power Down!
Cause : Internal power source voltage is below
than guaranteed workable range.
Solution : In case of using PSA adaptor :
Cable might be broken or adaptor itself
might be malfunctioning. Please contact
Roland Service or Roland authorized
dealers.
In case of using batteries :
Please replace with new batteries (p. 24).
Protected!
Cause : You are attempting to write data to a
song that has protection switched on.
Solution : To write data to the song, switch Protect
to OFF (p. 88).
Set the Repeat!
Cause : Repeat A (Starting Point) and B
(Ending Point) is not set.
Solution : Set the Repeat A and B (p. 58).
Stop P.Trainer!
Cause : The operation you attempted cannot be
done while the Phrase Trainer (p. 195)
is operating.
Solution : Press [PHRASE TRAINER] to turn off
the Phrase Trainer.
Stop Recorder!
Cause : The operation you attempted cannot be
done while the recorder is running
(playing or recording).
Solution : Press [STOP] to stop playback or
recording.
Too Many Songs!
Cause : You are attempting to create more that
100 songs.
Solution : Erase unneeded songs (p. 86).
Unformatted!
Cause : The Memory card is not formatted by
DOS.
Solution 1 : Turn off the BR-600, properly insert the
memory card, then turn the BR-600BR-
600 back on.
Solution 2 : Initialize the card (p. 199).
Unsupported Card!
Cause : The memory card (CompactFlash) or
MicroDrive inserted is not compatible
with the BR-600.
Solution : Use a memory card compatible with the
BR-600 (32 MB to 1 GB CompactFlash
with a power-source voltage of 3.3 V).
Unsupported Format!
Cause 1 : The BR-600 cannot recognize or use the
format of the inserted memory card.
Solution 1 : Insert a memory card initialized for use
with the BR-600 (p. 199).
Cause 2 : You have attempted to load an
incompatible WAV or AIFF file or SMF
to the BR-600.
Solution 2 : Check the format of the WAV or AIFF file
or SMF.