89
Organizing the Songs You’ve Recorded
Rev0.10
Section 2
3
Press CURSOR [ ] [ ] to move the cursor to
“PRT,” and press [ENTER].
The Song Protect screen appears in the display.
fig.02-710
4
Rotate TIME/VALUE dial to select the “ON.”
5
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
When a song is protected, the display will show the
song protect symbol.
fig.02-720
The BR-600 can save the following contents as song data.
• Recorded data
• Mixer settings (Pan, Track EQ, etc.)
• Insert Effect song patches
• Mastering Tool Kit song patches
• Pitch Correction Song Patches and
Correction Event Maps
• Rhythm Arrangements / Rhythm Patterns
• Loop Effects
• Tones from the Song Kit and imported with
Tone Load
• Utility (For a detailed explanation, refer to
“Parameter List” (p. 210).)
These recorded data or mixer settings are not saved
immediately after recording, but are saved when songs are
saved, and when the screens are switched.
Ordinarily, if a situation calls for it, a message appears in
the display prompting you to confirm that you want to save
the data, so you need not pay particular attention to this,
but if you want to save the settings to the song in its current
state, use the following procedure.
1
Hold down [STOP] and press [REC].

Saving the Current Settings

to the Song (Song Save)