Rev0.10
151
Section 4

Naming Patterns

Song patterns can be given a name (pattern name) that
consists of up to eight characters.
1
Confirm that [PAD] is not lit, then press [PATTERN].
[PATTERN] and [RHYTHM ON/OFF] light.
2
Press [RHYTHM EDIT].
The Pattern Edit screen appears in the display.
3
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to select a song pattern (S001 – 100).
fig.04-450
4
Press CURSOR [ ] [ ] to move the cursor to
“NAME,” and press [ENTER].
The Change Pattern Name screen appears in the
display.
fig.04-460
5
Use CURSOR [ ] [ ] and the TIME/VALUE dial
to change the characters.
After moving the cursor to a letter, you can switch
between uppercase and lowercase by pressing [ENTER].
6
Press [EXIT] repeatedly to return to the Play screen.
“Keep power on!” appears in the display, and the
changed pattern name is saved.
You cannot change the names of the preset patterns.